| Size: | |
|---|---|
| Availability: | |
| Quantity: | |
SCD
INFI DIAMOND
1.1-1.5mm Diameter (111) Orientation MCD Single Crystal Yellow Diamond Die Stone
| Suggested application | Wire Drawing Die Tool |
| Crystal growth process: | CVD |
| Color: | Colorless, Brownish |
| Benefits: | 1:A variety of thicknesses can meet the various needs of customers. the largest size is D=2.5mm 2:The crystal structure is good. Few defects and high success rate. 3: Customer repurchase rate is high. 4: High quality surface finishes |
| Orientation: | 111 |
| Shape: | hexagon |
| Lateral Dimensions Measured | to smaller sides |
| Edges | Laser Cut |
| Edge Orientation | <110> edges |
| Face Orientation | {111} faces |
| Laser Kerf | < 3° |
| Lateral Tolerance: | +0.1/-0 mm |
| Side 1, Roughness, Ra | Two sides polished, Ra < 30 nm / Unpolished |
| Thickness Tolerance | +/- 0.05 mm |
| Boron Concentration [B]: | <0.05 ppm |
| Nitrogen Concentration: | < 50 ppm |
1.1-1.5mm Diameter (111) Orientation MCD Single Crystal Yellow Diamond Die Stone
| Suggested application | Wire Drawing Die Tool |
| Crystal growth process: | CVD |
| Color: | Colorless, Brownish |
| Benefits: | 1:A variety of thicknesses can meet the various needs of customers. the largest size is D=2.5mm 2:The crystal structure is good. Few defects and high success rate. 3: Customer repurchase rate is high. 4: High quality surface finishes |
| Orientation: | 111 |
| Shape: | hexagon |
| Lateral Dimensions Measured | to smaller sides |
| Edges | Laser Cut |
| Edge Orientation | <110> edges |
| Face Orientation | {111} faces |
| Laser Kerf | < 3° |
| Lateral Tolerance: | +0.1/-0 mm |
| Side 1, Roughness, Ra | Two sides polished, Ra < 30 nm / Unpolished |
| Thickness Tolerance | +/- 0.05 mm |
| Boron Concentration [B]: | <0.05 ppm |
| Nitrogen Concentration: | < 50 ppm |